Please help to share the Knowledge >>
Time to make the final assembly.
Insert the cup into the body and twist to close tightly. Connect all the parts according to the drawing, if necessary adjust the bubbler’s location.
Remember to use teflon on the threads.
To open the cell just disconnect the upper tube from the compression elbow and twist the cup.
|
Part name |
Quantity |
Where to get |
Notes |
|
Body with bubbler |
1 |
| |
|
Cup with air inlet |
1 |
| |
|
Elbow with tube |
1 |
| |
|
Barbed elbow tube ID 1/4” |
1 |
|
|
|
Check valve with barbed connections for tube ID 1/4” |
1 |
|
|
|
SSL bushing 3/4” male reduced to 1/4” female |
1 |
|
|
|
Tube ID 1/4” OD 3/8” length 2.7” |
1 |
|
|
|
Tube ID 1/4” OD 3/8” length 4.7” |
1 |
|
|
|
Worm drive clamp width 5/16”, ID range 7/32”- |
4 |
|
|
|
Teflon tape |
1 |
|
©2009 HYDROGEN FIRST AID
